Are you getting ready for your first backyard barbecue of the season? If
so, then ensuring that your grill is ready to perform is essential. If
you’re having trouble with your
Traeger grill in San Jose, then read on for some troubleshooting solutions.
Your grill won’t power on.
If your Traeger grill fails to start, then some of the possible causes
are a tripped GFCI on the outlet, bad power outlet, blown fuse on the
back of the controller, bad extension cord, and break in the power cord.
Your grill won’t light.
If your grill powers on but doesn’t light, then this can be due to
the induction fan not running or the hotrod failing to heat up. Also,
your grill won’t light if no wood pellets are being fed to the firepot.
Your grill is tripping the GFCI.
When your grill repeatedly trips the outlet’s GFCI, this means that
a component of the grill is bad and causing it to short out to the ground.
Most often, this problem is the result of a faulty hotrod. Other possible
culprits include the controller, auger motor, and induction fan.
Your grill’s fan isn’t turning.
When the induction fan isn’t running, this can be due to a lack of
power from the controller to the orange wires. Also, this issue can crop
up if the grease on the fan’s shaft has seized up due to a lack
of use. In this case, spinning the fan a few times may solve the issue.
Lastly, wires and similar obstructions can prevent the fan from spinning.
Your grill’s auger won’t move.
If the auger is jammed, which can be caused by moisture in the pellets,
then this will prevent the auger from moving. A broken gear in the auger
motor or a broken shear pin that attaches the auger to its motor can also
cause this problem. Finally, the auger won’t move if it isn’t
getting power from the controller to the red wires.